Where Windows 11 Business Use Stands

Here’s an interesting question to ponder: what is business doing with Windows 11? Data on general Windows 11 use (e.g. StatCounter, Statista, and so forth) shows that for every copy of Windows 11, around 4 copies of Windows 10 are in use. Determining where Windows 11 business use stands is a whole ‘nother story. That’s because there’s very little solid intelligence about the proportion of business to home/hobbyist/”other” users available. Frankly, I’m a little frustrated…

Where Windows 11 Business Use Stands Is Mysterious

For years now, MS has been careful about what kinds of numbers it discloses about Windows, particularly where business versus other uses are concerned. We know that roughly 1.8B copies of Windows are in use worldwide. If the breakdowns from still-available desktop marketshare analytics are relevant — I’ll use StatCounter (the source for the opening graphic here, as of November 2022) for reference — that means roughly the following:

1. With 69.75% of the total count, that grants 1.25B copies to Windows 10.
2. With 16.13% of the total count, that confers 290M copies to Windows 11.

Those observations may or may not be relevant, because the foregoing count may only include Windows 10 and 11, not the earlier versions (7, 8 and 8.1, as well as XP and “Other”) that StatCounter tracks. If that’s true — then the copy counts for Windows 10 and 11 increase to 1.46B and 330M, respectively.

The Key Known Unknown

With all due respect to Dick Cheney, what’s missing from these numbers is  sense of how each count breaks down across the “business versus all other users, by type” category. My best guess is that the ratio is no greater that 1:1 (that is, for each business user there is one or more other users). It could be less than that, though.

So far, business users haven’t found hugely compelling reasons to upgrade to Windows 11. Indeed, it’s only the last year or so that I’ve seen most businesses I patronize or work with (including a great many law firms and medical practices and clinics) make the transition from Windows 7 to Windows 10.

With Windows 10 facing EOL in just under 3 years (2 years 10 months and some change, as of my most recent reckoning last week), there’s not much driving businesses to migrate sooner rather than later. It will be fascinating to see how things unfold. A lot will depend on when “Windows Next” (version 12, perhaps?) starts to appear on the horizon.

To me, it’s looking increasingly likely that many businesses may leapfrog from Version 10 to “Windows Next”, skipping Windows 11 in the process. I see this as in part a function of combining hardware refresh with OS migration, and in part as a function of inertia (if it ain’t broke, don’t fix it). Time will tell!

A Bump May Be Coming

If I’m right about the reasons for delaying migration and hardware refresh, there could be a pot of gold for PC sales from mid-2024 through mid 2026. This would seem to dictate businesses will plan hardware refreshes around EOL for Windows 10, with a blurring of the timeline around the exact date of October 14, 2025. This could get interesting…

Facebooklinkedin
Facebooklinkedin

Turning Off Corel PSP Ads

I’d had enough, enough, enough. After seeing an advertisement from Corel for extensions to its PaintShop Pro (PSP) product yesterday, I searched online for “Turn off ads in Corel PaintShop Pro 2023.” Thankfully turning off Corel PSP ads is not only easy, there’s even an official vendor-sponsored knowledge base (KB) how-to article. Hooray!

The intro graphic shows the program’s default settings for what shows up as “Message Preferences” in the program’s Help menu. Notice that users get opted into “Keep me informed with the latest product related messages.” Notice further that update frequency for such notification is — I kid you not — daily (“Once a day”).

Unticking Boxes For Turning Off Corel PSP Ads

By no coincidence whatsoever, changing those two settings turns ads off completely. What a relief. Here’s what the same dialog box looks like when properly altered:

Turning Off Corel PSP Ads.ads-off

Ads turned off. Wish all such apps (and browsers) were this easy to manage!

Just to recap those changes, they require unchecking the “Keep me informed…” box. They also require changing the “Receive updates/offers…” setting to “Do not show…” Presto! No more advertisements or notifications from PaintShop Pro. What a relief!

The Politics of Dancing…

In its own small way, this little tweak shows the importance of understanding how the programs you install on your Windows PCs work. If you don’t like something about them, you will often be able to change their behavior to make irritants or unwanted communications mute or disappear. This small example from PSP serves as a pretty good and nearly self-explanatory example.

I upgrade my copy of the software every 12-18 months, so I don’t need to be reminded to buy into the latest version. I’m not doing more serious photo or image editing so I don’t really care about the many tools and add-ons for PSP that Corel and third parties offer.

I just wanted the ads to go away. So that’s what I made them do. I imagine (but will find out when installing the 2024 update next year) that this default will reappear thereafter. But now, I know how to subdue that beast should it rear its unwanted head once again. Cheers!

Facebooklinkedin
Facebooklinkedin

Thunderbolt Monitor Makes Life Easy

OK, then. Lenovo sent me a terrific Thunderbolt 4 4K ThinkVision P27-u20 monitor. It actually showed up the day before Thanksgiving. It’s been sitting on my office floor since then, waiting patiently for me to get around to it. I’m working with the company to get a better sense of how Thunderbolt 4 works in an office environment. And indeed, now I can say from experience that a Thunderbolt monitor makes life easy for properly-equipped PCs and laptops.

Extremely narrow side and top bezels make for a compelling and nicely stackable monitor. [Click image for full-size view.]

Why Thunderbolt Monitor Makes Life Easy

Simple: plug it it, turn it on, set the device for dual displays and extend the desktop on a laptop. You can see how this looks in the Thunderbolt Control Center on the X12 Hybrid Tablet in the top graphic.

On the P360 Ultra, it fired up on its own when plugged into the front Thunderbolt 4 port. Colors are crisp, and the monitor appears to work as fast using TB4 as it does under either HDMI or DisplayPort. Better yet, the Thunderbolt-accessible ports on the monitor include TB4 in/out, 2xHDMI 2.0, DP 1.2, GbE (RJ-45), an audio mini-jack, and 2xUSB3.1 (1 USB-Type B, and USB-C is TB4 capable). It’s also got integrated speakers (3W each, so not really major, but adequate). It runs a 60Hz refresh rate with a response time of 4 -6 ms so it’s not really a gaming monitor by any stretch. That said, it’s nice for productivity and static creation work.

Resolution is nominal 4K (3840 x 2160), and it supports DCI-PC3 and Adobe RGB. It’s also DisplayHDR 400 certified (that means 10-bit color). See the product page for complete tech specs.

Built-in TB4 Hub Makes For a Killer Price

Yes, that’s right: the monitor includes an entirely capable, built-in Thunderbolt 4 hub as part of its equipage. Very cool, for a device with an MSRP of under US$550. Indeed, even the cheapest TB4 hubs, similarly equipped, cost over US$300 nowadays. It also includes a DP cable, a TB 4 cable, and a USB TypeB2A cable to hook an external USB 3.1 device up to its Type B port. Note: I just happened to hook the monitor up through a Lenovo TB4 Dock because I have one, but it will act as a dock by itself. That’s why two devices (dock and monitor) show up in the Thunderbolt Control Center up top.

To me, this functionality makes the price of the monitor easy to justify given that it comes ready to support Thunderbolt 4 based audio, video, networking and peripherals right out of the box. If you need another monitor and you can also benefit from TB4 connectivity and access, this could be too good to pass up.

Upon first exposure and short-term use, I’m wowed. I’ll follow up with more details after I’ve had a chance to spend some time with this puppy.

Notes Added December 7

A few more noteworthy things have occurred to me as I ponder this new peripheral and its inner workings. The USB C port delivers up to 100 W of power, so it should be able to handle most laptops without a separate AC connection for juice. The on-screen menus do take some fooling with to figure out. It is kind of heavy (28 lbs/12.7 Kg) but easy to assemble, move around and adjust. Here’s an interesting technical review from PC Magazine for your consideration, too.

 

Facebooklinkedin
Facebooklinkedin

Windows 10 WU Offers 22H2 Upgrade

Upon reading reports to that effect, I just confirmed that Windows 10 WU offers 22H2 Upgrade on the Boss’s Dell OptiPlex 7080 Micro PC. You can see the offer in the preceding graphic. At the same time, you can also see the offer to upgrade to Windows 11 in the right-hand column of the same Window. I reproduce this below. It’s got a 10th Gen Intel i7 CPU, so no problem meeting the Windows 11 hardware requirements.

With its 10th-Gen Intel CPU, TPM support, and so forth, this PC is more than ready for Windows 11.

Sold: Windows 10 WU Offers 22H2 Upgrade

The Boss has decided to stick with Windows 10. She’s not interested in an OS upgrade, and will wait until she MUST switch. Or perhaps something new will come along in the interim. On a 3-year cadence for major Windows versions with an EOL date for Windows 10 on October 14, 2024, that could get interesting.

It raises the question of whether Windows 10 will retire before the next version comes along, or if that version will precede its planned demise. According to the date calculator, that’s still 2 years, 10 months, 1 week and 2 days away (973 days) in the offing. Plenty of time for her to figure out which way she wants to go.

Refresh and Upgrade, or Just Upgrade?

Lots of other users will be pondering the timing of their next upgrade transitions between now and October 14, 2025. Many will decide to refresh their hardware as they transition to a new OS. I can see a kind of “lost generation” for Windows 11 as a result.

It will be quite interesting to see how PC sales look over the next 2-plus years for the same reasons. The trade-off looks very much like: wait for the next Windows version and budget for new PCs versus refresh earlier and upgrade to Windows 11. Could get interesting…

 

Facebooklinkedin
Facebooklinkedin

Windows 11 22H2 File Copy Fix Works

OK, then: I read the WinAero story about fixing the “slow file copy bug” in Windows 11 22H2. Indeed, it picqued my interest. “Hmmm,” I thought, “Maybe I can see on the P16 Mobile Workstation?” Yes, I could. I’m happy to confirm that the Windows 11 22H2 file copy fix works — on that PC, at least. What does this mean?

Take a look at the lead-in graphic. It’s a paused file copy. The file comes from my external F: Drive. (That’s a Sabrent Rocket 4 Plus 1 TB PCIe x4 NVMe SSD in a USB4 Acasis drive enclosure.) It’s copied to my built-in C drive. (That’s an internal Kioxio 2TB PCIe x4 NVMe SSD). Except for a dip about half-way through, it shows data rates from 1.2 to 2.3 GBps for a 20-plus GB file copy (a Macrium Reflect backup image).

That’s much, much better than the 600 – 950 Mbps I’d observed the last time I tried this with the same pair of devices. Looks like KB501738 issue does indeed get resolved in the latest Dev Channel Build (25252). I’m jazzed.

More Data: Windows 11 22H2 File Copy Fix Works

Even my slower USB3.2 NVMe Sabrent PCIe x3 with its older Samsung 950 1 TB SSD also shows a similar improvement. It shows a range of 750 MBps to a momentary high of 1.1 GBps in its copy of the same Macrium image file instead.

Gosh! It’s always nice when a usable performance bump occurs. It’s even better when the bump is both noticeable and measurable. And it makes the cost of relatively expensive NVMe drive enclosures more tolerable — maybe more justifiable, too — when the bump helps improve productivity.

Who knows? I might need to rethink my current take that paying US$100 extra to upgrade a USB3.2 NVMe enclosure to USB4 is too expensive. Stay tuned: more to follow next week!

Facebooklinkedin
Facebooklinkedin

Transient Mysterious GeForce Experience Error

It’s great that I love a good mystery, because I have one on my hands. Yesterday (November 30) I ran GeForce Experience to update the Lenovo P16 Mobile Workstation’s Quadro RTX A5500 GPU. An odd error message showed up at the tail end of the process. It read “Unable to install driver” but didn’t identify which one. Immediately thereafter, GeForce Experience announced a successful driver update (see lead-in graphic). I can only describe this phenom as a transient mysterious GeForce Experience error. As usual running things down means learning and figuring more things out.

Chasing A Transient Mysterious GeForce Experience Error

I did some searching around to see where GeForce Experience keeps its installer logs. It’s a long file-spec, like so:

C:\Users\<acct-name>\AppData\Local\NVIDIA Corporation\NVIDIA GeForce Experience

My source for this insight came from an Nvidia Support article entitled “How to enable NVIDIA Graphics Driver and GeForce Experience installer logging.” The log files, obviously enough, end in the “.log” extension. There were plenty of them to look through, too:

Transient Mysterious GeForce Experience Error.logs

Four different readable log files, no joy in any of them.

I couldn’t find any errors in any of those logs, though, which is why I’m calling this a transient mystery. If I read the afore-cited NVIDIA Support note correctly, I probably needed to enable logging before installing the latest GeForce driver. But it’s kind of a Catch-22: I didn’t know I had an error until the error already happened. If I really, really wanted to get to the bottom of this, I’d roll back to my preceding OS image, enable installer logging, and then reinstall the driver. But because it’s working as it should be and is throwing no errors I can see (Event Viewer and Reliability Monitor) I’ll live with the status quo.

But that’s the way things go sometimes, here in Windows World. I’m just glad things are working as they should be.

Facebooklinkedin
Facebooklinkedin

What MS Surface Lifetimes Tell Us

I just read a fascinating story about the original Surface Hub models at Neowin. It led me to an even more interesting website named EndOfLife.Date (here’s its info for the whole Surface product family). As I think about them, what MS Surface lifetimes tell us is also quite engaging. That’s because it speaks both eloquently and directly to this question: “What’s the useful lifetime for a modern PC?”

Details from What MS Surface Lifetimes Tell Us

Take a look at the lead-in graphic for this story. It comes from the afore-cited EndOfLife.date website. It shows two Surface Hub models (built around large and expensive 55″ and 84″ monitors) that arrive at EOL today, November 30. The graphic ascribes a lifetime of “7 years” to each device, but the timeanddate.com calculator gives it 7 years, 5 months, 4 weeks, and 1 day to be more precise. I’d call that 7.5 years in round numbers, myself.

The entire dataset for Surface devices at EndOfLife.date is quite interesting, though. It shows that this 7.5 year device lifetime is longer than that for most Surface products, especially newer ones. These tend to fall in a range from 4 years (for the newest devices) to 6 years (for older ones).

How Long Does a PC Remain Useful?

I submit that this range of lifetimes tells us what Microsoft thinks, as far as keeping PCs in service is concerned. What data I can find from other sources (try this Google Search to see the inputs to my assertions) puts the low end of common practice at 3 to 5 years, and the high end at 8-10 years.

Microsoft’s data is not just an estimate or an average, though, as with those other data points. They actually stop updating drivers and firmware as EOL strikes. That means businesses that buy Surface devices know from the outset how long they can safely use such equipment, and when it must be retired and refreshed.

Is 3-5 Years Long Enough for Business PC Life?

Not just Microsoft, but many major PC makers — including Lenovo, HP, Dell, and others — are apparently convinced this is on target. Their business models typically reach EOL in the range of 4-5 years.

Speaking from experience, I know you can stretch those boundaries on desktop PCs, where component upgrades or add-ons can bring new features and capabilities to older models (e.g.Thunderbolt 4, USB 4, and so forth) thanks to adapter cards. Notebooks and laptops, which are less adaptible and extensible, usually fall right inside a 4-5 year lifetime. But I agree that 6 years is about the outside edge for useful PC life where time and costs of maintenance, upkeep, and security start looming larger as older technology ages out.

Among other things, this tells me I’ll need to retire my 2014 vintage (8 years!) Surface Pro 3 soon. It also says my 6-year-old 2016 production desktop is ready for demotion to test PC only status. I’ve got a 2021 desktop ready to move in for production status. My four mainstay test/experimentation PCs are 2018 vintage, and are rapidly aging out of usability, too. What does your PC fleet tell you?

Facebooklinkedin
Facebooklinkedin

Build 25252 Offers Odd Install Behavior

Hey, it’s preview software, right? It’s supposed to do strange things from time to time. And indeed, on that front, Dev Channel Build 25252 (released yesterday) does not disappoint. What do I mean when I say that Build 25252 offers odd install behavior? At least two unusual items have popped up so far:

1. As is my usual practice, I attempted to RDP into both of my test PCs. Neither would accept a connection, and both reported “too many connections already in use” (none, in fact). But both were on the “Restart to continue install” window. I’ve never seen this result in RDP refusal before, but there you have it.

2. On the X12 Hybrid Laptop the 1st and 2nd reboots did not complete on their own. Instead, the PC shut down instead of restarting. A quick pop to the power button took care of this, but noteworthy nevertheless. I’ve seen this happen on other, earlier Dev Channel Builds on this very machine.

Feedback Hub Hears When Build 25252 Offers Odd Install Behavior

I’ll be reporting these oddities to Feedback Hub next, if they’re not already present in some form or fashion. It often gets interesting, figuring out how to describe install issues (and other Windows oddities) to synch with how others describe them there. I’m going to use RDP to jump onto both machines right now…

And that works as it should, thank goodness. I filed the RDP issue as “When Build 25252 Install Ready to Reboot, Doesn’t Accept RDP Connections.” I simply added a comment to my earlier filing on the other problem, which is named “Build 25231.1000 shuts down during install instead of rebooting.” This comment explains that the problem recurs for Build 25252.1000, and happens twice during the install process.

Another Build, Another Learning Exercise

This kind of thing is fairly routine for new Insider builds. I regard providing feedback as an important part  — indeed, arguably the most important part — of my job as a Windows Insider. After all, if nobody tells MS about little oddities that occur they may never hear about them otherwise. Reporting is a vital aspect of arming the Windows team with as much information to find and kill bugs as possible. Plus, it’s fun!

 

Facebooklinkedin
Facebooklinkedin

Macrium Announces Reflect Free EOL

Dang! I always hate it when this happens, but I do understand why it does. Macrium, maker of the excellent Reflect backup, restore and imaging software has just announced end-of-life for its free Version 8 of that package. As Macrium announces Reflect Free EOL, I realize I’ll have to start planning a different strategy for my test PCs and VMs going forward.

Details: Macrium Announces Reflect Free EOL

The announcement comes with plenty of warning. The company plans to provide security patches for the Free version until January 1, 2024 (more than a year from today). Users who want to keep using the package after the EOL data may do so, but will go unsupported thereafter. This also means that Windows version 11 22H2 is the most recent version of Windows that Reflect 8 Free will support.

What Else Is There?

Rest assured, I’ll be finding out. I came to Macrium Reflect Free (MRF, for short) thanks to the folks at TenForums.com and ElevenForum.com, my favorite online Windows communities. I’ll be watching to see what those people recommend. I also plan to dig into the elements presented in this recent (updated November 24) TechRadar story: Best free backup software of 2022. I’ll even be returning to MiniTool ShadowMaker and scanning over the MajorGeeks “Back Up” category.

But sigh: I wish this wasn’t necessary. MRF is a great, great tool. I’ll be sorry to see it go.

Facebooklinkedin
Facebooklinkedin

Minimum Battery Charge Required Blocks BIOS Upgrade

I have to laugh. I’m putting my office back together following not just the big holiday yesterday, but windows washed on Tuesday. I’m talking real, physical windows on the house, not the eponymous OS that is the focus of this blog. I had to disconnect the Lenovo Thunderbolt 4 dock, the wired GbE LAN. That meant my X12 was untethered and uncharged for several days. When I tried to log in to that machine today, I learned that the minimum battery charge required blocks BIOS upgrade. Sigh.

WTF: Minimum Battery Charge Required Blocks BIOS Upgrade

The funny thing is, I had some interesting foreshadowing on this topic just last night. I had to upgrade my now-aging iPad Air 2 to the latest iPad OS. At first, the Install button didn’t light up. Apple helpfully provided a error message by way of explanation, saying that a “minimum charge level of 20%” was required for the OS update install to go forward.

Thus, after leaving the X12 untethered for four-plus days, I found myself wondering. “Gee,” I thought to myself “What do you bet that the X12 BIOS update can’t go forward without a minimum charge level, either?” Sure enough: I checked online and indeed, the battery must be at 25% charge or higher, even if the PC is on AC power, for the BIOS upgrade to proceed.

Easily fixed! It only takes time (about 20 minutes in my case) to get past that 25% threshhold. As I write these words, the BIOS flash is underway at the UEFI command line. It’s just over 80% complete, in fact. Good thing the iPad forewarned me about this possible impediment, eh? Otherwise, I might have jumped into major troubleshooting mode, built a bootable BIOS installer, and done a manual BIOS upgrade instead.

If It’s Not One Thing, It’s Another…

It’s rare when I feel like the universe is looking out for me. Most of the time when trouble strikes, I have to roll up my sleeves and fix things the hard way. This time, time — and the related upping of battery charge levels — fixed things more  or less on its own. As you can see in the lead-in graphic, the same Lenovo Vantage utility that told me I needed a BIOS upgrade now shows me installation success for same.

I’m glad that’s over. I learned about Lenovo’s “self-healing BIOS” along the way to this resolution. I’m just glad serious troubleshooting and repair was unneeded in this happy case.

Facebooklinkedin
Facebooklinkedin

Author, Editor, Expert Witness